Encyclopedia … combined with a great Buyer's Guide!

VLib
Virtual
Library
Sponsoring this encyclopedia:     and others

With Wavelength Combs to Picometer Resolution

Posted on 2006-07-01 as a part of the Photonics Spotlight (available as e-mail newsletter!)

Permanent link: https://www.rp-photonics.com/spotlight_2006_07_01.html

Author: , RP Photonics Consulting GmbH

Abstract: An interesting new technique makes it possible to measure displacements with a resolution of picometers.

Dr. Rüdiger Paschotta

Ref.: T. R. Schibli, K. Minoshima, Y. Bitou, F.-L. Hong, H. Inaba, A. Onae, and H. Matsumoto, “Displacement metrology with sub-pm resolution in air based on a fs-comb wavelength synthesizer”, Opt. Express 14 (13), 5984 (2006)

Optical frequency combs as generated from carefully stabilized mode-locked laser sources represent equidistant set of very well defined optical frequencies. However, the corresponding wavelengths in air are much less well defined, as the refractive index of air undergoes changes due to varying pressure and humidity. As wavelength stability rather than frequency stability is the actually required feature for some displacement measurement schemes (e.g. based on Fabry–Perot interferometers), researchers have turned a frequency comb into a wavelength comb, where all spectral components have a quite precisely constant wavelength in air. This allowed them to make extremely precise displacement measurements without using an air-tight enclosure of their setup. For example, they can monitor extremely tiny drifts of a cavity length on the scale of some tens of picometers, or to measure the tiny nonlinear error of an ultraprecise nanopositioning translation stage of just a few a picometers over a translation range of 12 μm.

It is apparent that frequency combs from mode-locked lasers generate a wide range of opportunities in metrology – not only in frequency metrology, but also in other fields. Companies in the field of laser metrology are well advised to take notice of these developments.

See also: frequency combs, optical metrology, distance measurements with lasers


This article is a posting of the Photonics Spotlight, authored by Dr. Rüdiger Paschotta. You may link to this page and cite it, because its location is permanent. See also the RP Photonics Encyclopedia.

Note that you can also receive the articles in the form of a newsletter or with an RSS feed.

Questions and Comments from Users

Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.

Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.

Your question or comment:

Spam check:

  (Please enter the sum of thirteen and three in the form of digits!)

By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.

preview

If you like this page, please share the link with your friends and colleagues, e.g. via social media:

These sharing buttons are implemented in a privacy-friendly way!