Phase Modulators
Definition: devices for manipulating the phase of a laser beam
More general terms: optical modulators
German: Phasenmodulatoren
How to cite the article; suggest additional literature
Author: Dr. Rüdiger Paschotta
A phase modulator is an optical modulator which can be used to control the optical phase of a laser beam.
Frequently used types of phase modulators are electro-optic modulators based on Pockels cells, and liquid crystal modulators, but it is also possible e.g. to exploit thermally induced refractive index changes or length changes e.g. of an optical fiber, or induce length changes by stretching. Various kinds of phase modulators are used within the area of integrated optics, where the modulated light propagates in waveguides.
Important properties of phase modulators are:
- the amount of phase modulation which can be achieved (determining the possible modulation index and relative power in optical sidebands)
- the required drive voltage (see the article on Pockels cell drivers)
- the modulation bandwidth (range of modulation frequencies), which can e.g. be many gigahertz for electro-optic modulators, and far less for devices based on thermal effects or using liquid crystal materials
- the optical bandwidth in which the device can be used
- the device aperture, limiting the beam radius of the modulated beam
- the outer dimensions of the device
For different types of phase modulators, such properties vary in huge ranges. Therefore, different kinds of phase modulators are appropriate for different applications.
Applications
Some examples of applications of phase modulators are:
- A phase modulator within a laser resonator of a single-frequency laser can be used for wavelength tuning, or for active mode locking (FM mode locking) of a laser.
- A phase modulation of a beam with moderate modulation strength is often used in laser frequency stabilization schemes, e.g. with the Pound–Drever–Hall method.
- Various kinds of interferometers and setups for spectroscopic measurements require phase modulators, often with a periodic drive signal.
- Some metrology applications require frequency combs, generated by sending a single-frequency beam into a phase modulator. In that case, the phase modulation often needs to be strong in order to obtain a large number of optical sidebands.
- In data transmitters of optical fiber communication systems, phase modulators can be used for encoding the transmitted information. An example is the method of phase shift keying.
Suppliers
The RP Photonics Buyer's Guide contains 15 suppliers for phase modulators.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
See also: optical phase, optical modulators, electro-optic modulators, liquid crystal modulators, integrated optics
and other articles in the category photonic devices
 |
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!