Beam Distortions in Laser Cavities
Posted on 2006-07-24 as a part of the Photonics Spotlight (available as e-mail newsletter!)
Permanent link: https://www.rp-photonics.com/spotlight_2006_07_24.html
Author: Dr. Rüdiger Paschotta, RP Photonics Consulting GmbH
Abstract: A recent research papers explains a long known curiosity concerning laser beam quality, and furthermore increases the overall understanding of how beam distortions within a laser cavity influence the beam quality. The most important practical implication is that it helps to design laser cavities which make a laser less susceptible to the influence of thermal effects and other aberrations.
Ref.: R. Paschotta, “Beam quality deterioration of lasers caused by intracavity beam distortions”, Opt. Express 14 (13), 6069 (2006)
It started with a curiosity, discovered more than three decades ago but not explained until very recently: when a mirror of a solid-state laser resonator is translated, there are often precisely defined positions where the beam quality of the laser output deteriorates strongly. It was soon recognized that these positions are related to certain frequency degeneracies of higher-order cavity modes, but it was not clear why certain degeneracies affect the beam quality much more strongly than others, and how exactly this is related to aberrations in the laser gain medium.
In the paper referenced above (which is freely accessible for the public), the mentioned curiosity is now well explained as a coherent mode coupling effect. More importantly, this analysis increased the overall understanding of how beam distortions within a laser resonator influence the beam quality. This has important practical implications: if you know how to design a laser resonator so that it is much less sensitive to thermal effects in the gain medium, you can realize high beam quality in an easier way than the conventional one, which means reducing the thermal effects as far as possible.
This article is a posting of the Photonics Spotlight, authored by Dr. Rüdiger Paschotta. You may link to this page and cite it, because its location is permanent. See also the RP Photonics Encyclopedia.
Note that you can also receive the articles in the form of a newsletter or with an RSS feed.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
 |
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!