Pockels Effect
Definition: the phenomenon that the refractive index of a medium exhibits a modification which is proportional to the strength of an applied electric field (linear electro-optic effect)
German: Pockels-Effekt
Category: physical foundations
How to cite the article; suggest additional literature
Author: Dr. Rüdiger Paschotta
The Pockels effect (first described in 1906 by the German physicist Friedrich Pockels) is the linear electro-optic effect, where the refractive index of a medium is modified in proportion to the applied electric field strength. This effect can occur only in non-centrosymmetric materials. The most important materials of this type are crystal materials such as lithium niobate (LiNbO3), lithium tantalate (LiTaO3), potassium di-deuterium phosphate (KD*P), β-barium borate (BBO), potassium titanium oxide phosphate (KTP), and compound semiconductors such as gallium arsenide (GaAs) and indium phosphide (InP). A relatively new development is that of poled polymers, containing specifically designed organic molecules. Some of these polymers exhibit a huge nonlinearity, with nonlinear coefficients which are an order of magnitude larger than those of highly nonlinear crystals.
Mathematically, the Pockels effect is best described via the induced deformation of the index ellipsoid, which is defined by
in a Cartesian coordinate system. An electric field can now change the coefficients according to
with the electro-optic tensor rij. (The equation describes the change of n−2, rather than directly the change of the refractive index.) Note that the first index (i) runs from 1 to 6 in this contracted notation, where e.g. i = 4 corresponds to the y-z component.
Usually, only some of the coefficients rij are nonzero, depending on the crystal symmetry and the orientation of the coordinate system with respect to the crystal axes. For example, for lithium niobate (LiNbO3) or lithium tantalate (LiTaO3), which belong to the symmetry group 3m, the non-zero coefficients for the commonly used coordinate system are r12 = −r22 = r61, r13 = r23, r33, r42 = r51. For application of these materials e.g. in Pockels cells for electro-optic modulators, the largest tensor element (r33) is often used. Its magnitude is of the order of 30 pm/V for LiNbO3, with some wavelength dependence. Most other nonlinear crystal materials (e.g. BBO) have significantly lower electro-optic coefficients of a few pm/V, whereas some electrically poled polymers exhibit substantially higher values than LiNbO3.
As the index changes are usually small, the approximation
is often used.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
See also: Pockels cells, electro-optic modulators, electro-optic effect, nonlinear crystal materials
and other articles in the category physical foundations
 |
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!