Mode Cleaner Cavities
Definition: optical cavities used as filters for improving the beam quality of laser beams
Categories: optical resonators, photonic devices
How to cite the article; suggest additional literature
Author: Dr. Rüdiger Paschotta
A high-power laser beam with a single optical frequency can be fed through an optical cavity (resonator) in order to improve its beam quality. One exploits the fact that in general the frequencies of higher-order resonator modes do not coincide with the frequencies of the fundamental (Gaussian) modes. (This is caused by the Gouy phase shift in the resonator.) When the laser frequency is locked to a fundamental mode resonance, the higher-order modes of the resonator are not in resonance and are therefore strongly attenuated in transmission. The transmitted beam can thus have a strongly improved beam quality. At the same time, there is some cleanup of the optical spectrum. For high power efficiency, the mode matching of the input beam to the fundamental mode of the resonator has to be optimized.
Strictly, the term mode cleaner is somewhat imprecise, since such a device “cleans” beam profiles rather than modes.
Resonant mode cleaner cavities are used e.g. in large-scale interferometers for gravitational wave detection, where the required very high beam quality is difficult to achieve directly from the laser source due to thermal lensing and similar effects in high-power laser systems.
In comparison with nonresonant mode cleaners, mode cleaner cavities can achieve a much better cleanup of a beam profile and can provide spectral filtering at the same time, but they work only with (quasi-)monochromatic radiation, require careful mode matching, and are more difficult to design and set up.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
Bibliography
| [1] | A. Araya et al., “Optical mode cleaner with suspended mirrors”, Appl. Opt. 36 (7), 1446 (1997), doi:10.1364/AO.36.001446 |
| [2] | B. Willke et al., “Spatial and temporal filtering of a 10-W Nd:YAG laser with a Fabry–Pérot ring-cavity premode cleaner”, Opt. Lett. 23 (21), 1704 (1998), doi:10.1364/OL.23.001704 |
See also: mode cleaners, resonator modes, optical resonators, mode matching, beam quality
and other articles in the categories optical resonators, photonic devices
 |
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!