Interlocks
Definition: safety devices for automatically switching off a laser power or interrupting a laser beam
German: Sicherheitsverriegelung
How to cite the article; suggest additional literature
Author: Dr. Rüdiger Paschotta
The interlock of a laser is a mechanism which can contribute to laser safety by automatically turning off the laser or by blocking a laser beam via a beam shutter, e.g. when a protective box or a door is opened. Commercial lasers often have interlock connections on the back side of the laser driver (i.e. the electronic controls). This is suitable for connecting some interlock device which recognizes potentially dangerous situations:
- An electrical contact may be installed at a door, such that people entering that door are protected. Similarly, contacts may be attached to laser enclosures, covers and blinds.
- A light curtain or an infrared detector may be used to monitor the presence of persons in a designated laser area.
- A people counter at some entry can fulfill the same purpose. It counts the persons entering or leaving the dangerous area.
Once and interlock has been triggered, it will usually require a manual reset for resuming operation. For example, it would be inappropriate to block a laser beam only while a door is open, automatically releasing it again when it is closed.
Interlock functions may be built into a laser controller, but there are also separate interlock devices which can be connected to laser controllers.
In any case, an interlock system should be designed to be a fail-safe as possible. For example:
- In case of failure of a beam shutter (which may be monitored with an additional optical sensor, for example), it should take appropriate measures.
- If it loses optical power, it should bring systems into a safe state. (Note that dangerous lasers may be powered separately, i.e., power loss of the interlock system does not necessarily guarantee that the laser is out of operation.)
Being highly relevant for laser safety, interlock devices are subject to various laser safety standards. The planning of safety installation, including any interlocks, should be done by personnel with detailed experience in laser safety. Some suppliers of interlock devices also offer laser safety consulting.
As interlocks can be annoying in real life, they are often manipulated, particularly in research labs. Therefore, their usefulness for laser safety should not be overestimated.
Features of Interlocks
Interlocks can have a number of additional features, for example:
- Many of them have a key switch, so that they can be operated only by an authorized user, having the key. In other cases, authorization is done by entering a code on a numerical pad or with a swipe card.
- Some devices allow authorized users to override the interlock under certain conditions (“defeatable access controls”).
- Laser interlocks may be combined with access control systems, which can prevent unauthorized persons to enter certain sensitive areas. It may be desirable to physically prevent unauthorized access instead of blocking laser beams, if the latter could seriously affect operations. However, there should still be a fail-save method of entering the room in emergency situations, without requiring keys or key codes which may not be immediately available in an emergency.
- An interlock can have one or several built-in electronic drivers for beam shutters.
- Laser warning lights may be connected, which are automatically turned on when the laser beam is active.
Suppliers
The RP Photonics Buyer's Guide contains 4 suppliers for interlocks.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
See also: laser safety, beam shutters, beam dumps
and other articles in the category lasers
 |
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!