Critical Phase Matching
Definition: phase matching of a nonlinear interaction by adjustment of a propagation direction
Alternative term: angle phase matching
More general term: phase matching
Opposite term: noncritical phase matching
German: kritische Phasenanpassung, Winkel-Phasenanpassung
How to cite the article; suggest additional literature
Author: Dr. Rüdiger Paschotta
Critical phase matching (also called angle phase matching) is a technique for obtaining phase matching of some nonlinear process in a birefringent crystal. The interacting beams are aligned at some angle(s) to the axes of the index ellipsoid. In almost all cases, there are one or two waves polarized along one axis of the index ellipsoid (ordinary beam), while another one or two waves are polarized at some variable angle with the plane spanned by the other two axes (extraordinary beams). Adjustment of the propagation angle affects the refractive index of the extraordinary beam (called extraordinary refractive index), whereas the ordinary index stays constant. For some angular position, phase matching may be achieved.
As an example, Figure 1 shows the beam direction and the polarization directions for phase-matched second-harmonic generation in LBO based on the type I scheme with polarizations oo-e in the XY plane. This means that beam propagates within the XY plane, the fundamental polarization is ordinary (o, here in the Z direction) and the second-harmonic polarization is extraordinary (e, with an angle φ to the Y axis). Figure 2 shows the required parameters. For example, for a pump wavelength of 800 nm the phase-matching angle φ would have to be 31.6°, and the effective nonlinearity would be 0.72 pm/V. The walk-off angle of the second-harmonic beam (not shown in the diagram) would be 16.5 mrad.
The attribute “critical” comes from the fact that this technique is relatively sensitive to misalignment of the beams. There is only a finite range of beam angles (the acceptance angle, also called angular phase-matching bandwidth) where critical phase matching works (in the example above, it is 0.67 mrad for a 1 cm long crystal). This also implies that the beam divergence must be limited, and this often forces one to use beams with a large beam radius. Efficient nonlinear conversion then requires a higher peak power. A related problem is the spatial walk-off between ordinary and extraordinary beams, which limits the effective interaction length and can spoil the beam quality. With sufficiently high optical powers, walk-off effects can be minimized by using a short nonlinear crystal and/or large beam diameters.
A major advantage of critical phase matching is that the crystal temperature can often be close to room temperature, so that a crystal oven is not required.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
See also: noncritical phase matching, phase matching, phase-matching bandwidth, spatial walk-off, nonlinear frequency conversion
and other articles in the category nonlinear optics
This encyclopedia is authored by Dr. Rüdiger Paschotta, the founder and executive of RP Photonics Consulting GmbH. How about a tailored training course from this distinguished expert at your location? Contact RP Photonics to find out how his technical consulting services (e.g. product designs, problem solving, independent evaluations, training) and software could become very valuable for your business!
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!