Diameter–divergence Product
Definition: product of the diameter (at a beam waist) and the divergence angle of a laser beam
German: Strahldurchmesser-Divergenz-Produkt
How to cite the article; suggest additional literature
Author: Dr. RĂ¼diger Paschotta
The diameter–divergence product of a laser beam is the product of the beam diameter (i.e. twice the beam radius) at the beam waist and the beam divergence angle in the far field. The higher the diameter–divergence product, the lower is the laser beam quality.
A more frequently used quantity is the beam parameter product.
Questions and Comments from Users
Here you can submit questions and comments. As far as they get accepted by the author, they will appear above this paragraph together with the author’s answer. The author will decide on acceptance based on certain criteria. Essentially, the issue must be of sufficiently broad interest.
Please do not enter personal data here; we would otherwise delete it soon. (See also our privacy declaration.) If you wish to receive personal feedback or consultancy from the author, please contact him e.g. via e-mail.
By submitting the information, you give your consent to the potential publication of your inputs on our website according to our rules. (If you later retract your consent, we will delete those inputs.) As your inputs are first reviewed by the author, they may be published with some delay.
See also: beam parameter product, laser beams, beam quality
and other articles in the category general optics
If you like this page, please share the link with your friends and colleagues, e.g. via social media:
These sharing buttons are implemented in a privacy-friendly way!