Where to Buy Cold Mirrors
Cold mirrors reflect visible light while transmitting or absorbing infrared light. They can be used to reduce the heat load on an optical system caused by infrared light from a lamp, for example in a projector.
E | See also our encyclopedia article on cold mirrors! Related article: hot mirrors |
Related products: hot mirrors
Related product category: optical components and devices
21 suppliers for cold mirrors are listed in the RP Photonics Buyer's Guide. Both manufacturers and distributors can be registered.
Suppliers with Ad Package | |
---|---|
Company | Product Description |
101 East Gloucester Pike Barrington, NJ 08007 United States | Edmund Optics offers different kinds of cold mirrors, including versions with 0° and 45° angle of incidence and high performance versions with multi-layer dielectric coatings. |
Your Custom Optics Experts 17 Brant Ave Suite 6 Clark, NJ 07066 United States Quality: ISO 9001:2015 | Shanghai Optics is a custom optics manufacturer with over 55 years of optics manufacturing experience. Our cold mirrors are perfect for applications that require high reflectance in the visible spectrum and excellent transmission in the infrared. These cold mirrors are manufactured using a special proprietary all dielectric coating technique that yields the most durable commercially available product. Our cold mirrors will pass Mil. C-675, snap tape tests and are capable of operation at temperatures as high as 600°C. They will also operate and survive in extreme humidity environments. Cold mirrors are available from stock in one inch and two inch diameter round or one inch, two inch and four inch square configurations. Larger sheets are also available and may be cut into custom sizes. |
Standard, Custom and OEM Photonics Solutions 313 Washington Street Suite 403 Newton, MA 02458 United States | EMF, a Dynasil company, offers high transmission cold mirrors that are an excellent choice for preventing undesirable ultraviolet and visible light from damaging or altering the spectral characteristics. It offers two designs for use at either 0° or 45° angle of incidence. These mirrors are typically produced using borosilicate or float glass but are also offered on specialized substrate materials to withstand extremely high-temperature applications. EMF has supplied 700,000 cold mirrors to a global automotive components manufacturer without a single reported field failure. |
9177 Dutton Drive Twinsburg, Ohio 44087 United States | VisiMax offers various kinds of optical filters, including filters to be used as cold mirrors, which reflect only visible radiation and thus help to reduce the heat low in optical systems. |
Your company's products are not listed here? Get our ad package to enjoy that and many other benefits! |
All Suppliers | |
---|---|
From Asia: | |
DanYang Industrial Zone Danjie Road #100 Danyang China | |
1550, Boxue Road, Changchun, 130033 China | |
Room 16 D, Yujia Mansion No 168 PingWu Road Shanghai 200052 China | |
Outside Asia: | |
200 S Hallock Dr. Santa Paula, CA 93060 United States | |
4 Commercial Drive Salem, NH 03079–2800 United States | |
2925 College Ave. # A1 Costa Mesa, CA 92626 United States | |
Standard, Custom and OEM Photonics Solutions 313 Washington Street Suite 403 Newton, MA 02458 United States | EMF, a Dynasil company, offers high transmission cold mirrors that are an excellent choice for preventing undesirable ultraviolet and visible light from damaging or altering the spectral characteristics. It offers two designs for use at either 0° or 45° angle of incidence. These mirrors are typically produced using borosilicate or float glass but are also offered on specialized substrate materials to withstand extremely high-temperature applications. EMF has supplied 700,000 cold mirrors to a global automotive components manufacturer without a single reported field failure. |
101 East Gloucester Pike Barrington, NJ 08007 United States | Edmund Optics offers different kinds of cold mirrors, including versions with 0° and 45° angle of incidence and high performance versions with multi-layer dielectric coatings. |
239 Cherry Street Ithaca NY 14850 United States | |
1791 Deere Avenue Irvine, CA 92606 United States | |
Neugrüt 35 9496 Balzers Liechtenstein | |
Ukmerges g. 427 14185 Vilnius Lithuania | |
Im Langen Busch 14 58640 Iserlohn Germany | |
3600 West Moore Avenue Santa Ana, CA 92704 United States | |
1020 Calle Sombra San Clemente, CA 92673 United States | |
Your Custom Optics Experts 17 Brant Ave Suite 6 Clark, NJ 07066 United States Quality: ISO 9001:2015 | Shanghai Optics is a custom optics manufacturer with over 55 years of optics manufacturing experience. Our cold mirrors are perfect for applications that require high reflectance in the visible spectrum and excellent transmission in the infrared. These cold mirrors are manufactured using a special proprietary all dielectric coating technique that yields the most durable commercially available product. Our cold mirrors will pass Mil. C-675, snap tape tests and are capable of operation at temperatures as high as 600°C. They will also operate and survive in extreme humidity environments. Cold mirrors are available from stock in one inch and two inch diameter round or one inch, two inch and four inch square configurations. Larger sheets are also available and may be cut into custom sizes. |
11555 Rancho Bernardo Rd San Diego, CA 92127 United States | surfaceoptics.com Tel.: +1 858 675 7404 |
56 Sparta Avenue Newton, NJ 07860 United States | |
3600 S. Congress Avenue, Unit J Boynton Beach, FL 33426 United States | |
UQG Ltd. The Norman Industrial Estate 99 – 101 Cambridge Road, Milton, Cambridge, CB24 6AT, United Kingdom | |
9177 Dutton Drive Twinsburg, Ohio 44087 United States | VisiMax offers various kinds of optical filters, including filters to be used as cold mirrors, which reflect only visible radiation and thus help to reduce the heat low in optical systems. |
Click on a company entry to mark it. Product entries of suppliers having an ad package are displayed with a logo, product description and product image. |
Users: if any displayed information is incorrect (e.g., a listed supplier does not offer such products) or legally problematic, please notify RP Photonics so that the problem can be solved.
Suppliers: you can report modified data using a form, which is provided via the button "Edit profile data" on your company profile page. You can obtain our ad package for getting a much improved visibility and many more leads. (Tell your marketing people about it!)
If you are a supplier and want to be listed, please use the registration form.
An already registered supplier can use a customized form to report the full list of offered photonics products. That form is reachable with a link at the bottom of the supplier's profile page.
Anyone, not only suppliers themselves, can report additional suppliers. If possible, please provide a web address showing that this supplier indeed offers such products.